Resources search

Purpose: To determine the prevalence and severity of manual wheelchair rear wheel misalignment in community-dwelling manual wheelchair users and estimate the associated increases in rolling resistance (RR) and risk of repetitive strain injuries (RSIs).

Materials and Methods: Data were collected in an outpatient rehabilitation clinic, a university research laboratory, and at adaptive sporting events in the United States. Two hundred active, self-propelling man- ual wheelchair users were recruited. Angular misalignment (referred to as toe angle) while the wheelchair was loaded with the user, and the difference between the maximum and minimum toe angle (referred to as slop) with the wheelchair unloaded.

Results: Average results for toe angle and slop (movement in the rear wheels) were 0.92 and 0.61 degrees, respectively. Using a lab-based testing method, we quantified the impact of increased RR forces due to misalignment in increased RR forces. Our results indicate that the average toe angle while under load and slop, without loading, measured in the community increase required propulsion force by 3.0 N. Combined toe angle and slop (i.e., the worst-case scenario) added increased propulsion force by 3.9 N. Conclusions: We found that rear-wheel misalignment was prevalent and severe enough that it may increase the risk for RSIs and decrease participation. To mitigate this issue, future work should focus on reducing misalignment through improved maintenance interventions and increased manufacturing qual- ity through more stringent standards.

Purpose: Only 1 in 10 people with disabilities can access assistive devices, underlining the critical need for low-cost assistive products. This paper describes the design evolution of a manual user-operated standing wheelchair (SWC), translating from prototype to product.

Methods: The SWC design has been refined over 5 years through multiple iterations based on comments from user trials. The SWC product, Arise, provides standing functionality, facile outdoor mobility, afford- ability, customisability, and is aesthetically pleasing. A one-time fitting and training ensure optimal effort for operation, correct posture, and comfortable user experience. The SWC accommodates users of differ- ent sizes and body weights (up to 110kg) and minimises user effort with the use of a gas spring. Incorporating discrete adjustments enables customisation while retaining the advantages of mass manu- facturing, which is necessary for ensuring affordability.

Results: The SWC has been field-tested and well received by over 100 wheelchair users, and Arise was launched recently by the industry partner.

Conclusions: It should be noted that RESNA cautions on the use of any standing device without medical consultation. Nevertheless, with appropriate dissemination and awareness, it is anticipated that the afford- able SWC product, Arise, will immensely benefit the eligible users and make a difference in their quality of life.

Purpose: To explore participation in real-life activities during early childhood, compare children’s partici- pation based on motor function and investigate relationships between participation and parental empowerment.

Methods: Data derived from the Cerebral Palsy Follow-up Program (CPOP) in Norway and the research registry Habilitation Trajectories, Interventions, and Services for Young Children with CP (CPHAB). Fifty-six children (12–56 months, GMFCS levels I–IV, MACS levels I–V) and their families were included. Frequency and enjoyment of participation were assessed by the Child Engagement in Daily Life Questionnaire and parental empowerment in family and service situations by the Family Empowerment Scale at least twice during the preschool years. Differences between groups based on motor function were explored by the Kruskal–Wallis tests. A linear mixed model was conducted to explore relationships between child partici- pation and parental empowerment.

Results: Similarities and differences in participation between children at different motor function levels varied between the activities explored. Fluctuations in frequency and stable enjoyment scores over time were most common. A statistically significant relationship was revealed between child participation and parental empowerment in family situations, but not in service situations.

Conclusions: Child participation appears as context-dependent and complexly influenced by both motor function and parental empowerment. This supports a focus on transactional processes when exploring and promoting child participation.

Purpose: To describe the extent of participation and engagement in family activities and explore variables potentially impacting on these factors in family activities among girls and young women with Rett syndrome (RTT) under the age of 21.

Materials and methods: The Child Participation in Family Activities (Child-PFA) questionnaire was sent to parents in the target group (n = 42). Additionally, age, number of siblings at home, ambulation level, clinical severity and level of hand function were recorded to explore possible impact. Data were analyzed using descriptive statistics, Fishers exact test and cross-tables.

Results: 23 families participated. Highest degrees of participation and engagement were seen in social and stationary family activities. Indoor activities were frequent and showed high levels of participation and engagement, Outdoor activities were infrequent and showed low levels of participation despite a high degree of engagement. Routine activities were frequent but showed moderate to low participation and engagement. A negative association was found between participation in watching a movie and number of siblings living at home, and positive associations between engagement and age in three family activities.

Conclusion: Therapists working with this target group may benefit from focusing on engagement in routine activities and modification of family activities.

Previous research has repeatedly confirmed that students with special educational needs (SEN) are generally less accepted by their peers. Although inclusive teaching strategies and classroom characteristics are frequently hypothesised to improve students’ social participation, empirical evidence is scarce. Therefore, the purpose of this paper is to investigate classroom characteristics and teaching practices that can help foster social participation, in general, and reduce the effect of lower social participation among students with SEN, in particular. The sample includes 518 students in 31 Grade 4 and 7 classes from Austria, of whom 99 are students with SEN. The results show that students with SEN receive fewer peer nominations and perceive their social participation to be lower compared to their peers without SEN. However, the association between SEN and self-perceived social participation is moderated by the social classroom climate, i.e. the difference becomes smaller when the social classroom climate is more positive. Furthermore, the higher the personalised instruction was rated by a student, the higher was his or her social status. The results suggest that interventions should focus not only on the improvement of individual students (with SEN) but also on changing the whole classroom environment.

Background

Assistive technology is the products and services used by individuals with functional limitations to enable participation in society and realisation of rights afforded by the United Nations Convention on the Rights of Persons with Disabilities. The Assistive Product List is a comprehensive list of products identified as essential for access through universal health coverage. Key stakeholders, including organisations of persons with disabilities, civil service organisations, academic organisations and government ministries are collaborating to integrate assistive technology into policy and develop a priority assistive products list for Malawi.

Objective

To understand the organisational characteristics of, and assistive products provided by, key stakeholders working in AT in Malawi.

Study Design

Online survey of representatives from key stakeholder organisations.

Methods

We surveyed representatives of key stakeholder organisations to gather information regarding assistive technology product and service provision in Malawi. Responses were analysed using counts for closed-ended questions, and conventional content analysis for open-ended questions.

Results

A total of 36 of the 50 APL products were provided by eight organisations. Related services were provided for 36 of the 50 APL products by twelve organisations. Five organisations reported providing both products and services. Products and services are largely funded by donation and provided free to those who require them.

Conclusion

A range of organisations in Malawi play a role in assistive product delivery and related services. Coordinated AP delivery and service provision is required at a national level which is sustainable and inclusive, and is based on identified needs of the Malawian population.

Background and aim:

This study investigated the current state of wheelchair services in Bangalore Rural district, as provided by Bangalore Baptist Hospital, and identified areas for improvement.

Method:

a cross-sectional survey was held among 50 wheelchair users. Data was collected on demographics, satisfaction, wheelchair skills and level of disability using QUEST, WST-Q and CHART-SF questionnaires.

Result:

Overall satisfaction can be described as more or less satisfied, scoring 3.8 out of 5. Wheelchair users were less satisfied with the services compared to the wheelchair itself. The skills a wheelchair users had were strongly correlated with satisfaction scores (p < 0.01). Differences in satisfaction between genders were observed and related to multiple factors.

Conclusion:

Wheelchairs should be easy to use with support services being easily accessible. A wheelchair should be delivered together with a training program to provide the user with the skills to operate and maintain the wheelchair. There are gender-wise differences in satisfaction towards wheelchair services that influence satisfaction.

Purpose: To examine any associations between postural asymmetries, postural ability, and pain for chil- dren with cerebral palsy in sitting and supine positions.

Methods: A cross-sectional study of 2,735 children with cerebral palsy, 0-18years old, reported into the Swedish CPUP registry. Postural asymmetries, postural ability, the gross motor function classification sys- tem levels I–V, sex, age and report of pain were used to determine any relationship between these variables.

Results: Over half the children had postural asymmetries in sitting (n1⁄41,646; 60.2%) or supine (n1⁄41,467; 53.6%). These increased with age and as motor function decreased. Children were twice as likely to have pain if they had an asymmetric posture (OR 2.1–2.7), regardless of age, sex and motor func- tion. Children unable to maintain or change position independently were at higher risk for postural asym- metries in both supine (OR 2.6–7.8) and sitting positions (OR 1.5–4.2).

Conclusions: An association was found between having an asymmetric posture and ability to change position in sitting and/or lying; and with pain. The results indicate the need to assess posture and provide interventions to address asymmetric posture and pain.

Purpose: (1) to analyze training characteristics of recreationally active wheelchair users during handcycle training, and (2) to examine the associations between training load and change in physical capacity.

Methods: Former rehabilitation patients (N = 60) with health conditions such as spinal cord injury or amputation were included. Participants trained for five months. A handcycling/arm crank graded exercise test was performed before and after the training period. Outcomes: peak power output per kg (POpeak/kg) and peak oxygen uptake per kg (VO2peak/kg). Training load was defined as Training Impulse (TRIMP), which is rating of perceived exertion (sRPE) multiplied by duration of the session, in arbitrary units (AU). Training intensity distribution (TID) was also determined (time in zone 1, RPE ≤4; zone 2, RPE 5–6; zone 3, RPE ≥7).

Results: Multilevel regression analyses showed that TRIMPsRPE was not significantly associated with change in physical capacity. Time in zone 2 (RPE 5–6) was significantly associated with ΔVO2peak, %ΔVO2peak, ΔVO2peak/kg and %ΔVO2peak/kg.

Conclusion: Training at RPE 5–6 was the only determinant that was significantly associated with improvement in physical capacity. Additional controlled studies are necessary to demonstrate causality and gather more information about its usefulness, and optimal handcycle training regimes for recreationally active wheelchair users.